5

国际测试标准部分清单

Author mosch    Category 可靠性技术     Tags

首先想强调的是标准不是万能的,不能够唯标准论。标准一定要辩证的来看,产品不一样、使用条件不一样、可靠性要求不一样都需要对标准进行相应的裁减和调整来满足产品的要求,这才是对可靠性工程师最大的挑战。

International Test Standards

The following list of test standards is provided for your reference.

Automotive Test Standards
ASTM = American Society for Testing & Materials
IEC = International Electrotechnical Commission
ISO = International Organization for Standardization
ISTA = International Safe Transit Association
JEDEC – Joint Electronic Device Engineering Council
MIL – Military Specifications

Automotive Test Standards

General Motors: GMW14906: Lamp Development & Validation Test Procedures

ASTM Test Standards

ASTM D642: Standard Test Method for Determination of Compressive Resistance
ASTM D999: Standard Test Methods for Vibration testing of Shipping Containers
ASTM D1876: Peel Resistance of Adhesives
ASTM D3078: Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D3079: Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
ASTM D3332: Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3580: Vibration (Vertical Linear Motion) Test of Products
ASTM D4003: Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
ASTM D4169: Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D4332: Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
ASTM D4728: Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4991: Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D5276: Standard Test Method for Drop Test for Loaded Containers by Free Fall
ASTM D5487: Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D6653: Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM E1171: Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM E1876: Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of Vibration
ASTM F88: Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F1140: Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications
ASTM F1929: Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
ASTM F1980: Standard Guide for Accelerated Aging of Sterile Medical Device Packaging
ASTM F2096: \Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)

IEC Test Standards

IEC 60068-1: Environmental testing. Part 1: General and guidance
IEC 60068-2-1: Environmental testing – Part 2-1: Tests – Test A: Cold
IEC 60068-2-2: Environmental testing – Part 2-2: Tests – Test B: Dry heat
IEC 60068-2-5 Environmental testing – Part 2: Tests. Test Sa: Simulated solar radiation at ground level
IEC 60068-2-6: Environmental testing – Part 2: Tests – Test Fc: Vibration (sinusoidal)
IEC 60068-2-7: Environmental testing. Part 2: Tests. Test Ga: Acceleration, steady state
IEC 60068-2-9: Environmental testing – Part 2: Tests. Guidance for solar radiation testing
IEC 60068-2-10: Environmental testing – Part 2-10: Tests – Test J and guidance: Mould growth
IEC 60068-2-11: Environmental testing – Part 2: Tests. Test Ka: Salt mist
IEC 60068-2-13: Environmental testing – Part 2: Tests. Test M: Low air pressure
IEC 60068-2-14: Environmental testing – Part 2: Tests. Test N: Change of temperature
IEC 60068-2-17: Basic environmental testing procedures – Part 2: Tests – Test Q: Sealing
IEC 60068-2-18: Environmental testing – Part 2-18: Tests – Test R and guidance: Water
IEC 60068-2-20: Environmental testing. Part 2: Tests. Test T: Soldering
IEC 60068-2-21: Environmental testing – Part 2-21: Tests – Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-27: Environmental testing. Part 2: Tests. Test Ea and guidance: Shock
IEC 60068-2-29: Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
IEC 60068-2-30: Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-31: Environmental testing. Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
IEC 60068-2-32: Environmental testing. Part 2: Tests. Test Ed: Free fall
IEC 60068-2-33: Environmental testing – Part 2: Tests. Guidance on change of temperature tests
IEC 60068-2-38: Environmental testing – Part 2: Tests. Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-39: Environmental testing – Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
IEC 60068-2-40: Environmental testing – Part 2: Tests. Test Z/AM: Combined cold/low air pressure tests
IEC 60068-2-41: Environmental testing – Part 2: Tests. Test Z/BM: Combined dry heat/low air pressure tests
IEC 60068-2-44: Environmental testing – Part 2: Tests – Guidance on test T: Soldering
IEC 60068-2-45: Environmental testing. Part 2: Tests. Test XA and guidance: Immersion in cleaning solvents
IEC 60068-2-46: Environmental testing – Part 2: Tests. Guidance to Test Kd: Hydrogen sulphide test for contacts and connections
IEC 60068-2-47: Environmental testing – Part 2-47: Test – Mounting of specimens for vibration, impact and similar dynamic tests
IEC 60068-2-48: Environmental testing – Part 2: Tests. Guidance on the application of the tests of IEC 68 to simulate the effects of storage
IEC 60068-2-49: Environmental testing – Part 2: Tests. Guidance to Test Kc: Sulphur dioxide test for contacts and connections
IEC 60068-2-50: Environmental testing. Part 2: Tests. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
IEC 60068-2-51
Environmental testing. Part 2: Tests. Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
IEC 60068-2-52: Environmental testing – Part 2: Tests – Test Kb: Salt mist, cyclic (sodium, chloride solution)
IEC 60068-2-53: Environmental testing. Part 2: Tests. Guidance to Tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
IEC 60068-2-54: Environmental testing – Part 2-54: Tests – Test Ta: Solderability testing of electronic components by the wetting balance method
IEC 60068-2-55: Environmental testing. Part 2: Tests. Test Ee and guidance: Bounce
IEC 60068-2-57: Environmental testing – Part 2-57: Tests – Test Ff: Vibration – Time-history method
IEC 60068-2-58: Environmental testing – Part 2-58: Tests – Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60068-2-59: Environmental testing. Part 2: Tests. Test Fe: Vibration – Sine-beat method
IEC 60068-2-60: Environmental testing – Part 2: Tests – Test Ke: Flowing mixed gas corrosion test
IEC 60068-2-61: Environmental testing – Part 2: Test methods – Test Z/ABDM: Climatic sequence
IEC 60068-2-64: Environmental testing – Part 2: Test methods – Test Fh: Vibration, broad-band random (digital control) and guidance
IEC 60068-2-65: Environmental testing – Part 2: Methods of test – Test Fg: Vibration, acoustically induced
IEC 60068-2-66: Environmental testing – Part 2: Test methods – Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
IEC 60068-2-67: Environmental testing – Part 2: Tests – Test Cy: Damp heat, steady state, accelerated test primarily intended for components
IEC 60068-2-68: Environmental testing – Part 2: Tests – Test L: Dust and sand
IEC 60068-2-69: Environmental testing – Part 2-69: Tests – Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
IEC 60068-2-70: Environmental testing – Part 2: Tests – Test Xb: Abrasion of marking and letterings caused by rubbing of fingers and hands
IEC 60068-2-74: Environmental testing – Part 2: Tests – Test Xc: Fluid contamination
IEC 60068-2-75: Environmental testing – Part 2-75: Tests – Test Eh: Hammer tests
IEC 60068-2-77: Environmental testing – Part 2-77: Tests – Test 77: Body strength and impact shock
IEC 60068-2-78: Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state
IEC 60068-2-80: Environmental testing – Part 2-80: Tests – Test Fi: Vibration – Mixed mode
IEC 60068-2-81: Environmental testing – Part 2-81: Tests – Test Ei: Shock – Shock response spectrum synthesis
IEC 60068-2-82: Environmental testing – Part 2-82: Tests – Test Tx: Whisker test methods for electronic and electric components

ISO Test Standards

ISO 2247: Packaging — Complete, filled transport packages and unit loads — Vibration tests at fixed low frequency
ISO 8318: Packaging — Complete, filled transport packages and unit loads — Sinusoidal vibration tests using a variable frequency
ISO 8569: Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
ISO 11607-1: Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems
ISO 11607-2: Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes

ISTA Test Standards

ISTA 1 Series: 1A, 1B, 1C, 1D, 1E, 1G, 1H: Non-Simulation Integrity Performance Tests.
ISTA 2 Series: 2A, 2B, 2C, 2D, 2E, 2F: Partial Simulation Performance Tests.
ISTA 3 Series: 3A, 3E, 3F, 3H: General Simulation Performance Tests
ISTA 4 Series: 4AB: Enhanced Simulation Performance Tests.
ISTA 5 Series: 5B: Focused Simulation Performance Tests.
ISTA 7 Series: 7A, 7B , 7C, 7D: Development Tests.

JEDEC Standards

JESD22-A110-B: Highly-Accelerated Temperature and Humidity Stress Test (HAST).
JESD22-A104-C: Temperature Cycling.
JESD22-A101-B: Temperature Humidity Bias Test (THB).
JESD22-A106-B: Thermal Shock (TS).
JESD22-A103-C: High temperature stortage Life Test (HTSL)
J-STD-020D: Real Time Thermal Profiling, Moisture/Reflow Sensitivity Classification.

Military Standards & Handbooks

MIL-STD-105: Sampling Procedures and Tables for Inspection by Attributes.
MIL-HDBK-108: Sampling Procedures and Tables for Life and Reliability Testing (Based on Exponential Distribution)
MIL-STD-202: Test Method Standard: Electronic and Electrical Component Parts
MIL-HDBK-344: Environmental Stress Screening (ESS) of Electronic Equipment
MIL-STD-781: Reliability Testing for Engineering Development, Qualification and Production
MIL-STD-810: Environmental Engineering Considerations and Laboratory Tests

欢迎关注我的微信公众号

现在大家几乎都有微信,也越来越多的利用手机获取信息,为了让大家方便的获取我的博客内容更新,申请了微信公众号来进行博客内容的推送。欢迎大家关注我的微信公众号并进行互动。

微信公众号:mosch-reliability

weixin

欢迎联系我:

如果大家希望就可靠性或者其它方面进行交流,欢迎大家发邮件给我,我的邮箱是: m @ mosch . cn 。

链接表

功能